This Intex Tour Pro K1 inflatable kayak is perfect for a recreational outing at the pool or on a calm lake. It is one of the popular kayak brands and this kayak has gained huge popularity among kayak users. In this guide, I will provide in-depth detail of the Intex excursion pro kayak review.
The inflatable boat can accommodate one person with a maximum weight capacity of 90 kg. The carrying case for the Intex Excursion Pro is rather big. It is covered and considerably sturdier than the bags on other Intex boats. We have no concerns that this bag may rip or develop a hole after a few usages. The bag’s dimensions are huge. But that’s understandable because the boat is rarely folded as compactly as it was when it was shipped.
The Intex Excursion Pro is the most recent inflatable kayak on the market from the manufacturer. It appears to be quite similar to the Intex Explorer K2 at first sight. Not only are there variances in design, but also materials, equipment, and accessories.
The provided pump works nicely for inflating. Despite its small size and lack of durability, the air pump performs admirably. In addition, the stand is rather tiny. That is, however, unsurprising. The accompanying accessories should not be expected to perform miracles, especially if they are part of a low-cost full package.
My Experiences about Intex Excursion Pro Kayak
The boat is sold as a full kit, as is customary for Intex. A bigger and more durable carrying case is included, and a larger double lifting air pump for quick kayak inflation:
To tighten the valves, use a valve key.
- a useful repair kit
- Front and rear paddlers’ footrests
- Checking the right air pressure with a manometer
- For a better seating position in the boat, use an inflatable seat pad.
- several rod holders
- one skeg for shallow water and one skeg for deep-water (instead of a general skeg)
Who the Intex Excursion Pro Kayak is for?
A person who loves to kayak on Sail and fish in lakes, rivers, or the sea is best. This new model is built with the INTEX Super-Tough system: impact-resistant materials and 0.75 mm thick scratch-resistant, triple-layer canvas for maximum durability. It includes everything you need to get started with this recreational craft in a striking orange colour and sporty graphics. Its interior is set up for use by one or two people with a floor and two inflatable seats with ribbed base and backrest and an additional cushion that allows one of the seats to be raised. It also has adjustable footrests and metal support to place a fishing rod or GPS device.
This kayak is very versatile. According to customers’ opinions, it adapts to any user profile. It is suitable for beginners as well as semi-professional kayakers. The kayak can also be used on lakes, rivers, or beaches. For these reasons, it is a product with many purchase requests on the internet. Most of the problems occur mostly with the assembly of the product. It is to say, problems of adaptations and others due to inadequate packaging of the product.
Intex Excursion Pro Kayak Features & Specifications
- Weight carrying capacity: 400 pounds Dimensions: 151″ x 13″ x 18″
- Super-tough laminate material with a polyester core was used to create this product.
- Skegs are directional mobility devices that may be used in both deep and shallow water.
- Weight of Kayak: 39 lbs.
- 2 Air Chambers: 3 Fishing Rod Holders: 2 Crew Capacity: 2
- Material that is both lightweight and abrasion-resistant.
- Spring-loaded valves with high-pressure efficiency.
- Accessories mounting bracket.
- Both ends have handles.
- Inflatable seat with backrest that may be adjusted and removed.
- For raised seating, an inflatable booster pad is available.
- Two adjustable footrests on the floor.
- D-rings made of stainless steel.
- Two holders for rods.
- A kayak with two oars is included in the packaging.
- Bag for patching up.
- Hand Pump with Adjustable Mounting Bracket.
- Owner’s guide.
Intex is a well-known company in the inflatable and swimming accessories industry, having been founded in 1972. Intex has delivered top-quality service to its clients for more than 40 years, with Customer Satisfaction as its core philosophy. With its excellent goods, Intex is one of the top brands that have consistently serviced this market.
Pros and Cons of the Intex Excursion Pro Kayak
It’s tough to pinpoint the kayak’s specific strength. It has appropriate proportions and comes with many helpful extras for an inflatable kayak in this price range. The kayak has a lot more inside room than similar kayaks in this price range because of its large proportions. For enjoyable trips on lakes and rivers, the directional stability and performance on the water are excellent.
Regardless, the Intex Excursion Pro is a beginning inflatable kayak that we recommend for occasional usage. Due to the low air pressure, the air chambers are not rigid enough, the backrests do not provide adequate support when paddling on extended trips, and the paddles are excessively unstable. The skin of the boat is far more durable than that of the Intex Challenger or Explorer. However, it does not appear to be as durable as the skin of a Gumotex or Grabner inflatable kayak.
Intex Excursion Pro Buying Guide
The Excursion Pro kayak can accommodate two people. Surprisingly, it costs the same as or less than many single-person kayaks with similar or even fewer amenities. Another excellent advantage is that it can be used as both a touring and fishing kayak.
Several other amenities contribute to the value of this elegant yacht. Let’s take a look at the characteristics and the advantages and disadvantages of the Intex Excursion Pro Kayak.
What Real Customer Say about Intex Excursion Pro
It’s very good. Very stable, pumps quickly, everything is there. The footrests are great for paddling alone or with the family. Everything works very well thanks to the two adjustable seats and footrests. Who wants to try the kayak for the first time without spending too much money but looking for a reasonable boat is here in good hands.
The product is very well packaged and corresponds to the description. The installation is easy, the navigation is good, and I hope it will be pleasant to use after several seasons.
Worth buying verdict
The kayak’s open design makes it simple to get in and out. When entering the kayak, though, the bottom chamber gives way considerably. You should only enter the kayak if the water depth is sufficient (30–40 cm) if you’re using the deep-water fin.
You can paddle it solo as well, thanks to the changeable seat positioning. The boat’s length on the water is significantly less than the boat’s overall length, as shown in the accompanying photo. The reason for this is that most of the weight is concentrated in the center of the boat. With a deep water fin, however, the Excursion Pro may be paddled without difficulty.
Is it user-friendly?
Yes! If water (for example, splashes when paddling or waves from a passing boat) comes into the boat, the seat cushion is high enough, so you don’t have to sit in the wet. The backrest provides only little support and gives the appearance of being unstable. It simply supports a tiny portion of the lower back during paddling. It bends away to the rear if we lean into it appropriately.
How to use the Intex Excursion Pro kayak?
Two aluminum paddles of 218 cm with a grooved paddle are included to handle the kayak, two keels, one fixed and the other directional, which you can change depending on where you will use the boat. If you use it for fishing, the kayak has two supporting fishing lines and a front and rear storage area with canvas-covered handles to hold the bags (bags not included). At both ends, the kayak has ropes and handles welded to the canvas for easy transport in and out of the water. In addition, the kayak’s covers are reinforced against possible chafing.
Getting the Excursion Pro ready for cruising will take very little effort, thanks to the included INTEX hand pump. The kayak has a pressure gauge for the optimal filling to make sure you inflate it to the right pressure. The inflator also facilitates the deflation and folding process by extracting all the air from inside the kayak and folding the kayak much easier and takes up less space.
It also includes a practical bag for transport and storage. The structure of this model has three independent air chambers with double safety valves that ensure the buoyancy of the inflatable kayak. If water enters the kayak during use, use the drain plug to rinse it quickly and easily without moving it.
Like all INTEX boats, the Excursion Pro inflatable kayak complies with the European ISO 6185-1 standard and TÜV GS certification. Enjoy the most exciting water sports with INTEX inflatable boats and kayaks!
How to Maintain Intex Excursion Pro?
Although the handbook specifies that the boat is built on a flat area free of stones and other sharp items, we did not strictly adhere to this requirement. We’d want to know whether the boat’s skin could not resist these tiny stones. Of course, we don’t want to do any harm, but the boat skin gives us confidence because it isn’t simply PVC. The boat’s skin is made of polyester fabric that is PVC-coated on both sides. The boat skin may be repaired using the included repair kit if it is damaged.
Check the air pressure with the included manometer as soon as the air chamber reaches its final form. The chambers may be inflated to a maximum pressure of 0.08 bars. This isn’t much for an inflatable kayak, but it’s a bit more than the Intex Challenger K2 and Explorer K2. If you’ve been on the water with the boat for a while, take a stop on the beach to check the air pressure.
Why you should buy this product?
If you are tall and paddling the boat alone, we recommend using the front bottom loops (intended for the 2-person configuration). Aside from the footrest, the interior of the kayak is spacious enough for a solitary paddler.
In comparison to a single-person kayak, the kayak with a two-person configuration floats significantly better. There have also been several upgrades in contrast to the other Intex kayaks. Because of the boat’s length, the directional stability has improved considerably, the air chambers have become more dimensionally stable, and the maximum load capacity has increased by 20 kg. A speed of 3.1–3.4 km/h is a reasonable estimate.
List of Intex Excursion Pro Alternatives
Some Real People Questions
How long is the Intex Excursion Pro?
Its sizes are 10ft 3in X 3ft X 1ft 8 inches.
How do you fold an Intex Excursion Pro?
If the kayak is wet, the drain opening in the stern can be utilized to drain the water before dismantling it. It ensures that the majority of the water drains off the boat. To do so, tip the boat forward, and the water in the boat will drain out the drain aperture. It would help if you wiped the interior dry with a sponge without removing the water. The boat’s skin may also be readily wiped dry.
The air came out of the air chambers with no effort, and the boat folded up easily to fit back into the bag. On the other hand, the folded boat did not make it back to its starting point.
How do you inflate an Intex Excursion Pro kayak?
Normally, the floor air chamber would be inflated first, followed by each side. It’s possible that you won’t be able to inflate either side straight away fully. Inflate one side halfway, then the other, and double-check that the floor is level. Then finish inflating the kayak.
Can one person use an Intex K2 kayak?
Yes, on the water, the Intex Explorer K2 with two paddlers. A single person may also paddle the kayak. The side chambers are long and wide, with a high ceiling. That’s why, when paddling, you contact them with the paddle.
What is the Intex kayak made of?
This robust kayak includes an inflatable I-beam bottom for comfort and rigidity and tough vinyl construction. A detachable skeg provides directional stability, and two adjustable, inflated seats provide comfort with backrests. With a Boston valve on either side, quick inflation and deflation are a snap.
How old and who built the oldest known kayaks?
Kayaks are said to date back at least 4,000 years. The oldest kayaks are on display in Munich’s State Museum of Ethnology’s North America section, with the oldest dating from 1577. Native Americans built a variety of watercraft for various purposes.
What is a drop-stitch kayak?
The phrase “drop stitch” refers to a construction process that allows for significantly higher inflation and pressures than a regular PVC floor. A more firm floor is created by higher pressures, which can improve paddling performance. Inflatable SUP paddle boards employ this technology.
How do I collapse my Intex Explorer kayak?
You can do it slowly and be patient. Don’t let your kayak deflate just yet. When your kayak is inflated, cleaning and drying it is much easier. A tarp isn’t always essential, but it may assist you in cleaning dirt and sand from your equipment. Remove any dirt or debris from your kayak.
How do I store my Intex Kayak?
It’s considerably easier to store an inflatable kayak than it is to store a rigid kayak. You don’t need a lot of room, but you will need somewhere dry and cold to store it. When keeping it for a lengthy amount of time, it’s better not to leave it inflated.
How do you remove skeg from Intex Kayak?
Inflatable kayaks have lower directional stability than fixed-hull kayaks. To improve directional stability, most inflatable kayaks can be fitted with a skeg. Unfortunately, we had to find out that the fin holder is not attached straight with our model. The sloppy mounting of the skeg holder is annoying because it will make the kayak even worse in terms of directional stability.
How do you inflate Intex Excursion Pro Kayak Professional Series inflatable fishing kayak?
Normally, the floor air chamber would be inflated first, followed by each side. It’s possible that you won’t be able to inflate either side straight away fully. Inflate one side halfway, then the other, and double-check that the floor is level.
How much does it weigh?
It weighs 39.01 lb.
Can you use this for one person?
The Intex Excursion Pro kayak may also be used as a solo kayak. A footrest is rarely found on low-cost inflatable kayaks. A footrest not only improves your grip when paddling.
What are the folded dimensions?
Dimensions: 151in x 13in x 18in approx.
Are these boats strong and thick enough to drag up onto lake beaches?
Yes. However, it would help if you were careful with that.
Can this boat be used after several times months to verify durability?
The kayak’s running qualities were better than predicted, particularly when paddled by two people. Two paddlers propel the boat. The increased weight and improved weight distribution also improve the boat’s waterline. Our afternoon evaluation, however, was unable to determine the kayak’s long-term durability and robustness.
Does anyone know how many air chambers it has?
Yes, Intex Excursion Pro has three chambers.
Can I buy another inflatable seat booster?
Inflatable boosters are similar to other backless boosters available on the market. Its goal is to keep youngsters in their seats long enough for the seat belt to be properly positioned. It passed both inflated and deflated crash testing, indicating that it is completely safe to use.
Should I buy this despite a lot of negative reviews about punctures?
Yes, it is a good one; find the best price for you!
Can this kayak fit at least three people even though it seats 2?
Nope. It fits two people.
Does the pressure gauge work?
Both the pump nozzle and the pressure gauge latch into the valves and function well (a feature lacking on the explorer).
What is a good replacement/ backup/secondary pump for this, as it seems the connector is non-standard?
The footrests are a good feature as long as the paddlers are not too tall, as the Intex Excursion Pro is only meant for short and pleasant journeys owing to its low air pressure, large and yet a rather short hull for a 2-person kayak. There are three footrest positions for each seating position in the boat (front and back in a 2-person kayak and center in a 1-person kayak).
Can this work for someone who is 6’5″?
Footrests are unsuitable for tall people. On extended excursions, the footrests are inconvenient for tall paddlers. Because we have to bend our legs too far when utilizing the footrest, even though it is fastened in the outermost loops, this isn’t a major problem for short tours. However, during half-day or full-day trips, it gets unpleasant. For little people, the footrests may be a great help in getting a good grip on the boat.
Enjoy the most exciting water sports with the Intex K2 Excursion Pro inflatable kayak. The boat has an ergonomic shape for easy navigation and a durable three-layer 0.75 mm thick tarpaulin in a striking dark orange colour that gives it greater visibility in the water. It has three air chambers and valves with a double safety system. The kayak has two directional fins, one of which is for easy navigation in shallow water.
The interior is equipped with two inflatable, adjustable and removable seats with a backrest and an additional airbag to increase the height if desired. In addition, the boat has a ribbed inflatable floor, mooring rings, handles welded to the canvas, ropes at the ends, two storage spaces at the front and rear, and a drain plug.
The boat features sturdy 3-layer construction with high molecular weight PVC, resistant to abrasion, sunlight, oil, and seawater. The comfortable inflatable seat with a backrest is adjustable and removable. In addition, the storage compartment in the front and back is ideal for storing your stuff. The kayak is equipped with high-pressure spring valves for quick inflation and deflation. So, the removable skeg on the bottom increases the directional stability of the kayak. Retaining ropes at both ends makes it useful for transporting the kayak. The inflatable kayak can be folded and packed for easy storage and transport when not in use.
Includes two double aluminum paddles (218 cm), manual inflator and deflator, pressure gauge, bag with handle for storage and transport, and repair kit with patch for any holes or punctures. Enjoy the summer and have fun with Intex!
- Super tough laminate PVC with polyester core: Light weight and highly resistant to damage from abrasion, impact and sunlight
- High pressure inflation provides extra rigidity and stability, with high pressure spring loaded valves for easy inflation and fast deflation
- Includes 2 removable skews for deep and shallow water, 2 floor mounted footrests, 2 integrated recessed fishing rod holders, 2 adjustable bucket seats
- Removable and adjustable mounting bracket for additional accessories, such as GPS systems, fish finders, swivel fishing rod holders etc. Includes a carry bag and repair patch
- Storage space in bow and Stern with stainless steel d rings for tying down Dry bags and gear; Kayak total weight capacity: 400 pounds
- 3-ply super tough construction employs a high molecular PVC that is unaffected by gasoline, oil and salt water. It is highly resistant to damage from abrasion, impact and sunlight. It also permits more air pressure for rigidity.
Last update on 2021-09-28 / Affiliate links / Images from Amazon Product Advertising API